Command Dials - Nikon Z 9 Reference Manual

Role
[Exposure
E
compensation]
9
[ISO sensitivity]
[None]

Command Dials

The following roles can be assigned to the command dials. To view
options, highlight items and press 2 .
Role
[Exposure setting]
[Focus/AF-area mode
selection]
[Sub-command dial
zoom role]
A Custom Settings: Fine-Tuning Camera Settings
658
•
Assigning this function to the Fn button for
vertical shooting allows exposure compensation
to be adjusted by holding the button and
rotating a command dial.
•
Assigning this function to the lens control ring
allows exposure compensation to be adjusted
by rotating the ring.
Rotate the lens control ring to adjust ISO
sensitivity.
The control has no effect.
Reverse the roles of the main and sub-command
dials in selected modes. Press 4 or 2 to highlight
a mode and 1 or 3 to switch roles.
Switch the roles played by rotating the main and
sub-command dials while the focus-mode button
is pressed.
Choose the role played by the sub-command dial
in the zoom display.
•
Choose [Exposure setting] to change the role
played by the sub-command dial in each mode.
•
Choose [Zoom] to use the sub-command dial to
zoom in or out.
Description
Description