Nikon Z 9 Reference Manual page 318

❚❚ Connecting
Follow the steps below to establish a connection between the camera
and smart device in Wi-Fi mode.
•
Some operations are performed
using the camera, others on the
smart device.
•
Additional instructions are available via SnapBridge online help.
1
Smart device: Launch the SnapBridge app, open the
, and select [Wi-Fi mode].
If this is the first time you have launched the app, you should
instead tap [Connect to camera] in the welcome display. When
prompted, tap the category for your camera and then tap the
"Wi-Fi" option when prompted to choose the connection type.
2
Camera/smart device: Turn the camera on when prompted.
Do not use any of the controls in the app at this point.
Wireless Connections
318
tab, tap