D
Cautions: Time-Lapse Videos
•
Sound is not recorded with time-lapse videos.
•
The shutter speed and the time needed to record the picture to the
memory card may vary from shot to shot. As a result, camera may be
unable to take shots at the selected interval.
•
Shooting will not begin if a time-lapse video cannot be recorded at current
settings, for example if:
- the value selected for [Interval] is longer than that selected for
[Shooting time],
- [00:00'00"] is selected for [Interval] or [Shooting time], or
- the memory card is full.
•
When 7680 × 4320 is selected for [Frame size/frame rate], shooting will
not start if a DX lens is attached or [DX] selected for [Choose image area].
•
The K button cannot be used to view pictures while time-lapse recording
is in progress.
•
For consistent coloration, choose a white balance setting other than
4 [Auto] or D [Natural light auto] when recording time-lapse videos.
•
Regardless of the option selected for Custom Setting c3 [Power off
delay] > [Standby timer], the standby timer will not expire while
recording is in progress.
•
Shooting may end if camera controls are used, settings are changed, or an
HDMI cable is connected. A video will be created from the frames shot to
the point where shooting ended.
•
The following end shooting without a beep sounding or a video being
recorded:
- Disconnecting the power source
- Ejecting the memory card
C The Photo Shooting Menu: Shooting Options
566