Nikon Z 9 Reference Manual page 412

❚❚ Ethernet
Follow the steps below to create host profiles for Ethernet connections.
Before proceeding, connect an Ethernet cable to the camera's Ethernet
connector. Do not use force or attempt to insert the connectors at an
angle. Connect the other end of the cable to a router.
1
Select [ON] for [Wired LAN] in the
network menu.
2
Select [Connect to other cameras] in the
network menu, then highlight [Network
settings] and press 2 .
3
Highlight [Create profile] and press J .
Synchronized Release
412