Flash - Canon HV10 Instruction Manual

Selecting the Data Code
You can select the data code to be
displayed when playing back movies.
Options
[ DATE], [ TIME]
Displays the date or time when the scene
or still image was recorded.
[ DATE & TIME]
Displays both the date and time of the
recording.
[ CAMERA DATA]
Displays the exposure (f-stop) and shutter
speed used when recording the image.
[ CAM.& D/T]
Displays the exposure, shutter speed, date
and time of the recording.
MENU
( 22)
MENU DISPLAY SETUP/
DATA CODE
MENU
Desired option
Reading the Histogram Display
When viewing still images you can
display the histogram display and the
icons of all the functions used at the time
of recording. Use the histogram as a
reference to verify the correct exposure of
the still image.
The area to the right of the histogram
represents highlights and the left side
represents shadows. A still image whose
histogram skews to the right is relatively
bright; while one whose histogram peaks
to the left, is relatively dark.
Default value
NOTES
If you turn all displays on with
histogram display will appear also after
recording a still image while reviewing it within
the time set for the [REVIEW] option (or
immediately after recording it, if [REVIEW] is set
to [

Flash

You can use the built-in flash for
recording still images in dark places. The
flash is equipped with the red-eye
reduction function.
POINTS TO CHECK
Select a recording program other than
[ FIREWORKS] (
Options
(auto)
The flash fires automatically according to
the brightness of the subject.
(red-eye reduction, auto)
The assist lamp lights up to reduce the
red-eye effect. The flash fires automatically
according to the brightness of the subject.
(flash on)
The flash always fires.
(flash off)
The flash does not fire.
Other Functions
Shadows
OFF]).
).
51
E
Highlights
DISP.
, the
( 10)
Default value