Wan Settings; Dynamic Ip (Dhcp) - D-Link DSL-3785 User Manual

Section 4 - Configuration
Select Dynamic IP Address (DHCP) to obtain an IP address automatically
from your ISP. Select this option if your ISP does not provide you with a specific
IP address.

WAN Settings

Connection: Select Dynamic IP Address (DHCP).
WAN
Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed
Connection Type:
IP VC-Mux.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Select None or Default Route.
Usage:
NAT Enable: Enable or disable Network Address Translation.
Enable PPPoE
Enable or disable PPPoE Passthrough.
Passthrough:
Option60 Vendor The vendor class identifier is listed here.
ID:
Click Save when you are done.
D-Link DSL-3785 User Manual
WAN Settings

Dynamic IP (DHCP)

30