Wan Settings; Dynamic Ip (Dhcp) - D-Link DSL-3900 User Manual

Section 4 - Configuration
From this page you can configure your WAN settings. To access this page, click Internet from the Settings menu on the bar on
the top of the page. Then click Advanced Settings... on the right side, then scroll down to WAN Settings
Select Dynamic IP Address (DHCP) to obtain an IP address automatically
from your ISP. Select this option if your ISP does not provide you with a specific
IP address.

WAN Settings

Select Dynamic IP Address (DHCP).
Connection:
Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed
Connection Type:
IP VC-Mux.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
NAT Enable
Enable or disable NAT.
Enable PPPoE
Enable or disable PPPoE Passthrough.
Passthrough
Click Save when you are done.
D-Link DSL-3900 User Manual
WAN Settings

Dynamic IP (DHCP)

32