Pppoe - D-Link DSL-3785 User Manual
Wireless ac1200 dual-band gigabit adsl2+/vdsl2
Hide thumbs
Also See for DSL-3785:
- Installation manuals (8 pages) ,
- Quick installation manual (65 pages)
Table of Contents
Advertisement
Section 4 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
WAN Settings
Connection:
Select PPPoE.
WAN
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Connection Type:
Select PPPoE LLC or PPPoE VC-Mux.
Service Name:
Enter name of your service. (Optional)
AC name:
Enter the AC name. (Optional)
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage:
Select None or Default Route.
NAT Enable:
Enable or disable Network Address Translation.
Enable PPPoE
Enable or disable PPPoE Passthrough.
Passthrough:
Authentication
Select the authentication protocol your ISP uses. The options are
Protocol:
Auto, PAP, or CHAP.
Connect mode
Set the connection to be Always-on, Connect-On-Demand, or
select:
Manual.
D-Link DSL-3785 User Manual
PPPoE
32
Advertisement
Table of Contents
