Protecting The Recorded Images - Panasonic VL-SW251BX Operating Instructions Manual

Recording

Protecting the recorded images

You can protect up to 20 recorded images that you do not want to erase while viewing images.
{VOLUME}
Main monitor station
1
While viewing the image, press {MENU}, then
select "PROTECT" by pressing {VOLUME}
( SELECT).
BRIGHTNESS
GUIDE OFF
PROTECT
DELETE
2
Press {MENU} (OK).
L " PROTECTED" appears on the display.
3
To end the operation, press {OFF}.
N
To release protection
1 While viewing the protected image, press
{MENU}, then select "PROTECT" by pressing
{VOLUME} ( SELECT).
2 Press {MENU} (OK).
L " PROTECTED" disappears from the display.
Note:
L I f you protect one of a sequence of 8 continuously recorded images, the 8 images are protected as one set.
This set of 8 images is counted as one image.
L Y ou can protect a maximum of 20 images. To protect other images after this maximum is reached, you need to
release the protection from other images first.
30
{MENU}
{OFF}
Sub monitor station
1
While viewing the image, press {D} (MENU), then
select "PROTECT" by pressing { } or {▲}.
PICTURE MENU
PROTECT
DELETE
2
Press {D} (OK).
L appears on the display.
3
To end the operation, press {OFF}.
N
To release protection
1 While viewing the protected image, press
{D} (MENU), then select "PROTECT" by
pressing { } or {▲}.
2 Press {D} (OK).
L disappears from the display.
{ } {▲}
{D}
{OFF}