Setting the Wireless LAN Channel
When setting the wireless LAN channel on the [Wireless LAN
settings] tab, first select [WFT-E3] or [WFT-E3A]. The WFT-E3
supports 13 channels, and the WFT-E3A, 11 channels.
Keep in mind that the WFT-E3A cannot be used on channels 12 and
13 as the [WFT-E3] can.
Wireless or Wired LAN Settings Files
Open
Open a settings file saved on the computer or a CF card.
Save the settings file on the computer or a CF card. The [Settings name] is
used as the file name.
Save
For instructions on applying a settings file on a CF card to the camera, refer
to page 56.
Apply settings to
Apply the settings file to a camera. The camera and computer must be
camera
connected with the USB cable.
Load settings from
Load a settings file on the camera to the computer. The camera and
camera
computer must be connected with the USB cable.
Settings files can be used as follows.
WFT Utility (Software)
91
9