Table of Contents
Advertisement
same NAT. If using a Public IP address, set this parameter to "No".
•
NAT Traversal
Default setting is "No". Enable the device to use NAT traversal when it is behind firewall on a private
network. Select Keep-Alive, Auto, STUN (with STUN server path configured too) or other option
according to the network setting.
WEATHER UPDATE
To customize LXP100 to display weather information for the preferred city, users could go to web
GUI->Settings->Web Service page and enter the city code in the following options:
By default the City Code is set to "Automatic", which allows the phone to obtain weather information
based on the IP location detected. To use "Self-Defined City Code" option, please follow the steps below
to obtain the correct city code:
•
In a web browser, go to www.weather.com;
•
Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH";
•
The searching result will show in a new window with URL in the browser's address bar. For example,
http://www.weather.com/weather/right-now/Boston+MA+USMA0046
•
In the above link, USMA0046 is the city code to be filled in "Self-Defined City Code" option.
Users could then further configure the "Update Interval" and "Degree Unit" for weather information
display.
FIRMWARE VERSION 1.0.5.23
LXP100 USER MANUAL
Page 54 of 61
Advertisement
Table of Contents
