Playback On A Tv Screen; Recording To A Vcr Or Digital Video Recorder - Canon DC DC210 Instruction Manual

Playback on a TV Screen

POINTS TO CHECK
Before connecting the camcorder, select
the [TV TYPE] setting according to the TV
set to which you will connect the
camcorder - [WIDE TV]: TV sets with 16:9
aspect ratio or [NORMAL TV]: TV sets
with 4:3 aspect ratio (
Connecting
Connect the camcorder to the TV
following the connection diagram shown
in the previous section Connection
Diagrams ( 64).
Playback
1
Turn on the camcorder and the
connected TV or VCR.
On a TV: Select as the video input the
same terminal to which you connected
the camcorder. On a VCR: Set the
input selector to the external video
input (usually labeled LINE IN).
2
Start the playback of the movies
( 32) or still images (
NOTES
Turn off all the devices before starting the
connections.
Sound from the built-in speaker will be muted
while the STV-250N Stereo Video Cable is
connected to the camcorder.
We recommend powering the camcorder
using the compact power adapter.
( 12)
41).
33).
Connecting to a TV or VCR
Recording to a VCR or Digital Video
Recorder
You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device.
Connecting
Connect the camcorder to the VCR
following the connection diagram shown
in the previous section Connection
Diagrams ( 64).
Recording
1
Connected device: Load a blank
cassette or disc and set the device
to record pause mode.
2
This camcorder: Locate the scene
you wish to copy and pause
playback shortly before the scene.
3
This camcorder: Resume the movie
playback.
4
Connected device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying is complete.
5
This camcorder: Stop playback.
NOTES
We recommend powering the camcorder
using the compact power adapter.
By default, the on-screen displays will be
embedded in the output video signal, but you
can change the displays by repeatedly pressing
DISP.
( 51).
65
( 12)