Connections For Playback On A Tv Screen - Canon MV550I Instruction Manual

Connections for Playback on a TV Screen

You can connect the camcorder to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camcorder (
Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
Switching the AV/headphone terminal
Through the menu, the camcorder's AV/headphone terminal can be switched to
function as either the AV terminal or the headphone terminal.
+
TAPE CAMERA
( 40)
Open the menu and select VCR SET UP. Then select AV/PHONES and set it
to AV or PHONES and close the menu.
• When the terminal is switched to PHONES, PHONES appears in the display.
Using the headphones
• Make sure you switch the AV/headphones terminal to PHONES before using
headphones. If the AV/headphones terminal is not switched to PHONES before
you use the headphones, noise will come out from the headphones.
Downloaded From VideoCamera-Manual.com Manuals
PLAY
,
+
TAPE
(VCR)
VCR SET UP
AV
MIC
,
+
CARD CAMERA
AV/PHONES•••AV
12).
PLAY
,
+
CARD
(VCR)
E
33