Moving Scenes In The Playlist; Deleting Scenes - Canon DC DC210 Instruction Manual

Moving Scenes in the Playlist

From the original index screen, press
. From the playlist index screen,
PLAYLIST
select ( , ) the scene to move.
FUNC.
( 25)
MOVE
FUNC.
Move (
marker to the new position of the
scene and press (
YES

Deleting Scenes

You can delete those scenes that you are
not interested in keeping. Remember that
when you delete scenes in the playlist,
you do not affect your original recordings;
However, when you delete an original
recording, it will be deleted also from the
playlist.
IMPORTANT
Be careful when deleting original recordings.
Once deleted, an original scene cannot be
recovered.
Do not change the position of the power
switch or the / switch while the scene is
being deleted.
NOTES
Scenes cannot be deleted when the disc is
protected ( 57).
You may not be able to delete scenes shorter
than 5 seconds.
, ) the orange
).
Managing Scenes
Deleting a Single Scene
POINTS TO CHECK
Disc type: DVD-RW • VR mode
From the original index screen, select
( , ) the scene to delete. To delete
a scene only in the playlist, press
first, and then select the scene.
PLAYLIST
FUNC.
( 25)
DELETE
FUNC.
YES
Deleting a Scene Just After Recording
POINTS TO CHECK
Disc type: DVD-RW •
VIDEO or VR mode
Immediately after recording a scene:
1
If the joystick guide does not appear
on screen, press (
2
Push the joystick (
If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display the
joystick guide in the illustration above.
When the mode switch is set to AUTO,
only one joystick guide will appear.
3
While reviewing the scene, select
( ) and press (
55
( 12)
( 12)
NEXT
) to display it.
) toward .
).