Zooming; Quick Start Function - Canon DC DC210 Instruction Manual

Zooming

POINTS TO CHECK
: In addition to the optical
zoom, the digital zoom is also available
( 38).
Optical zoom: 35x
Digital zoom*: 1,000x
*
only.
35x Optical Zoom
Move the zoom lever toward W to
zoom out (wide-angle). Move it toward
T to zoom in (telephoto).
You can also change the zoom speed
( 38). You can select one of three fixed
zoom speeds or a variable speed that
depends on how you operate the zoom
lever: Press gently for a slow zoom; press
harder for faster zooms.
NOTES
When set to [ VARIABLE], the zoom
speed will be faster in the record pause mode.
Keep at least 1 m (3.3 ft.) to the subject. At
wide-angle, you can focus on a subject as close
as 1 cm (0.39 in.).

Quick Start Function

Using the Quick Start function, you'll
never have to miss out on those great
and fleeting opportunities to take a picture
or record video. When you press
( 12)
QUICK START
camcorder, you can get it ready to start
recording within approx. 1 second.
Zoom out
Start ready mode while recording.
Zoom in
1
Press
• The standby lamp goes on to signal
that the camcorder is Quick-Start ready
- "ready and waiting" to resume
recording.
• Sometimes the standby lamp will
flash as the camcorder completes
some preparations. The camcorder is
Quick-Start ready when the lamp stops
flashing and stays on.
2
When you wish to resume
recording, press
again.
Within approx. 1 second, the
camcorder is ready in record pause
mode.
instead of turning off the
POINTS TO CHECK
: You cannot enter the Quick-
QUICK START
QUICK START
Recording
31
( 12)
firmly.