Advertisement
with the circuit board assembly instead of individual parts.
(Q2501, Q2502, Q2503, Capstan Coil)
8. When installing the IC2501 (AN3845SC or AN3846SC) or Capstan
Stator C.B.A., be sure to apply Silicon Grease (VFK1301). Refer to
"Stopper Angle, Capstan Rotor Unit, Oil Seal, Capstan Stator
C.B.A., MR Head, and Sub Rotor Unit (Model: E, F, G)"of
MECHANISM SECTION in DISASSEMBLY/ASSEMBLY
PROCEDURES.
9. Since the UHF/VHF TUNER/TV DEMODULATOR UNIT (Ref. No.
E21) has already been pre-adjusted at the factory, do not try to
adjust the UHF/VHF TUNER/TV DEMODULATOR UNIT. The UHF/
VHF TUNER/TV DEMODULATORUNIT replacement part is
available as a complete assembly unit only.
10. EEPROM IC (IC6005), Main C.B.A. replacement note:
After replacing EEPROM IC (IC6005) or Main C.B.A., be sure to
perform the
ADJUSTMENT procedures.
11.2. MECHANICAL REPLACEMENT PARTS LIST
11.2.1. MECHANISM PARTS ON CHASSIS
"PG SHIFTER
ADJUSTMENT" in ELECTRICAL
66
Advertisement
