Advertisement
C. Install the Mechanism Chassis and Cassette Up Ass'y straight
onto the Main C.B.A. so that the Sensor LED clears the hole in
the Mechanism Chassis and that 5 Connectors (P6201, P6202,
P3551, P4001,and P4451) are aligned and seated securely.
5. Installation of Cassette Up Ass'y
A. Confirm that the Locking Tab (L-7) under the Cassette Up Ass'y
is in Hole on the Mechanism Chassis when installing the
Cassette Up Ass'y. Then, slide the Cassette UpAss'y towards the
back.
B. When installing 2 Screws (S-9), slide the Holder Unit (Refer to "
METHOD FOR LOADING/UNLOADING OF
SERVICE NOTES) to tighten screws.Then, slide it back to the
EJECTPosition.
C. Hook Spring (P-1) to the Drive Rack Arm on the Mechanism
Chassis.
5.2. MECHANISM SECTION
5.2.1. Disassembly/Reassembly Method
Fig. D4
MECHANISM" in
23
Advertisement
