Control Pad Functions - Frigidaire FEF357CGSA Owner's Manual

Control Pad
Functions
CANCEL PAD— Used to
cancel any function
previously entered except the
time of day and minute
timer. Push CANCEL to stop
cooking.
BAKE PAD—
Used to enter
the normal
baking mode
temperature.
VARI BROIL
PAD— Used
to select the
variable broil
function.
CLEAN PAD—
Used to select
the self-
cleaning cycle.
The oven can be programmed to:
• Bake normally
• Time bake
• Vari Broil
• Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation. Push and hold STOP TIME. After 7 seconds, the control will beep once. This will block the controls from sounding
when a pad is pushed. To return the sound, push and hold STOP TIME again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push VARI BROIL. "— — —" appears in the display.
2. Push and hold the UP ARROW until "HI" appears in the display.
3. Push and hold VARI BROIL until °F or °C appears in the display.
4. Push the UP or DOWN ARROW to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
satisfactory use of your oven, become familiar with the various functions of the oven
as described below.
UP and DOWN ARROW PADS— Used along with the
function pads to select oven temperature, cooking time,
stop time (when programming an automatic stop time),
time of day, clean time and minute timer.
OVEN, PRE-HEAT & LOCK LIGHTS—
The "OVEN" light will glow each time
the oven element turns on to maintain
the set oven temperature. The "PRE-
HEAT" light will glow when the oven is
first set to operate, or if the desired
temperature is reset higher than the
actual oven temperature. The "LOCK"
light will flash until the door locks when
the self-clean cycle is in use. It glows
constantly after the door locks.
TIMER ON/OFF
PAD— Used to set
or cancel the
minute timer. The
minute timer does
not start or stop
cooking.
5
For
CLOCK PAD— Used
to set the time of day.
FEATURE
INDICATOR
LIGHTS— These
light to show which
feature is in use.
BAKE TIME PAD—
Used to enter the
length of the baking
time.
STOP TIME PAD—
Used to set the desired
stop time for baking.
Can be used with BAKE
TIME to program a
delayed bake cycle.