Changing Oven Light; Adjusting Oven Temperature - Frigidaire FEF357CGSA Owner's Manual

Ceramic-glass cooktop, electronic oven controls and a self-cleaning oven interior
Hide thumbs Also See for FEF357CGSA:
Table of Contents

Advertisement

Changing Oven Light

(some models)
Adjusting Oven
Temperature
Note: The adjustments made will not
change the self-cleaning temperature.
Be sure the range is unplugged and all parts are COOL before
replacing the oven light. Wear a leather-faced glove for protection against possible
broken glass.
To Change the Oven Light
1. Turn electrical power off at the main source or unplug the range.
2. Press wire holder to one side to release the glass shield.
3. Replace bulb with a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holder into place.
5. Turn power back on again at the main source (or plug the range back in).
6. The clock (if equipped) will then need to be reset. To reset, see Setting the
Clock and Minute Timer in this Owner's Guide.
The temperature in the oven has been set at the factory. When first using the oven,
be sure to follow recipe times and temperatures. If you think the oven is too hot or
too cool, the temperature in the oven can be adjusted. Before adjusting, test a
recipe by using a temperature setting that is higher or lower temperature than the
recommended temperature. The baking results should help you to decide how
much of an adjustment is needed.
To Adjust Oven Temperature:
1. Push BAKE.
2. Set the temperature to 550°F (287°C) by pushing and holding the UP ARROW.
3. Within 2 seconds, push and hold BAKE until the special 2 digit display
appears. Release BAKE. The display now indicates the amount of degrees
offset between the original factory temperature setting and the current
temperature setting. If the oven control has the original factory calibration, the
display will read "00."
4. The temperature can now be adjusted up or down 35°F (17°C), in 5°F (1°C)
steps, by pushing and holding the UP or DOWN ARROW. Adjust until the
desired amount of offset appears in the display.
5. When you have made the desired adjustment, push CANCEL to go back to the
time of day display. When adjusting oven temperature, a minus sign (-) will
appear before the number to indicate that the oven will be cooler by the
displayed amount of degrees.
19
(some models)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents