Table of Contents
Advertisement
Control Pad
Functions
CANCEL PAD— Used to
cancel any function previously
entered except the time of
day and minute timer. Push
CANCEL to stop cooking.
BAKE PAD—
Used to enter the
normal baking
mode
temperature.
VARI BROIL
PAD— Used to
select the
variable broil
function.
CLEAN PAD—
Used to select
the self-
cleaning cycle.
The oven can be programmed to:
•
Bake normally
•
Time bake
•
Vari Broil
•
Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation. Push and hold STOP TIME. After 7 seconds, the control will beep once. This will block the controls from sounding when
a pad is pushed. To return the sound, push and hold STOP TIME again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for
any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push VARI BROIL. "— — —" appears in the display.
2. Push and hold the UP ARROW until "HI" appears in the display.
3. Push and hold VARI BROIL until °F or °C appears in the display.
4. Push the UP or DOWN ARROW to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory use of your oven, become familiar with the various functions of the
oven as described below.
UP and DOWN ARROW PADS— Used along with the
function pads to select oven temperature, cooking time,
stop time (when programming an automatic stop time),
time of day, clean time and minute timer.
OVEN, PRE-HEAT & LOCK LIGHTS— The
"OVEN" light will glow each time the
oven element turns on to maintain the set
oven temperature. The "PRE-HEAT" light
will glow when the oven is first set to
operate, or if the desired temperature is
reset higher than the actual oven
temperature. The "LOCK" light will flash
until the door locks when the self-clean
cycle is in use. It glows constantly after
the door locks.
TIMER ON/OFF
PAD— Used to set
or cancel the
minute timer. The
minute timer does
not start or stop
cooking.
5
CLOCK PAD— Used
to set the time of day.
FEATURE
INDICATOR
LIGHTS— These
light to show which
feature is in use.
BAKE TIME PAD—
Used to enter the
length of the baking
time.
STOP TIME PAD— Used
to set the desired stop
time for baking. Can be
used with BAKE TIME to
program a delayed bake
cycle.
Advertisement
Table of Contents
