Before First Use; The Autodose Technology (Autodosing) - AEG LF9C1612AQ User Manual

Indicators for options downloadable via App only

8. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

9. THE AUTODOSE TECHNOLOGY (AUTODOSING)

Read this chapter carefully.
Extra Silent indicator.
Prewash indicator.
Intensive indicator.
AutoDose liquid detergent tank indicator. When it lights, appliance auto‐
matically doses the detergent.
This indicator appears beside
AutoDose softener tank indicator. When it lights, appliance automatically
doses the softener.
AutoDose status indicator. It lights when AutoDose function for additives
is disable.
Linked mode indicator. It lights when both AutoDose tanks are linked
and filled with the same detergent. AutoDose function for softener is dis‐
able: the indicator
gent tank indicators
These indicators will appear next to
creasing the automatic detergent or softener dosage.
when Intensive option is set.
disappears and the display shows two liquid deter‐
.
and
3. Make sure to fill the AutoDose tanks
with liquid detergent
softener
basic setting " paragraph in "The
AutoDose technology" chapter.
4. Pour 2 litres of water inside the drum.
This action activates the drain system.
5. Set and start a program for cotton at
the highest temperature without any
detergent and laundry in the drum.
9.1 Introduction
Right detergent and fabric softener
dosage takes better care of the laundry
and ensuring good wash performances.
ENGLISH
when increasing or de‐
and fabric
. Refer to "AutoDose
21