Remove The Ss-Board; Remove The C1-Board; Remove The C2-Board; Remove The Stand Brackets - Panasonic TH-42PV80D Service Manual

7.9.

Remove the SS-Board

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS23 and
SS34).
3. Disconnect the flexible cables (SS53A and SS56A).
4. Remove the molding prop (×1
5. Remove the srews (×5

7.10. Remove the stand brackets

1. Remove the plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws
(×4 each) and remove the stand brackets (left, right).
).
) and remove the SS-Board.

7.11. Remove the C1-Board

1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (×8
).
4. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×4

7.12. Remove the C2-Board

1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws
(×8 ).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C23).
7. Remove the screws (×4
7.13. Remove the front shield unit
assy
1. Disconnect the connector (A11, A51 and A52). (See sec-
tion 7.4.)
2. Remove the screws (×2
shield unit assy.
20
) and remove the C1-Board.
) and remove the C2-Board.
, ×2 ) and remove the front