7.14. Remove
Board and GS-Board
1. Remove the front shield unit assy. (See section 7.13.)
2. Remove the screws (×3
front.
3. Remove the screws (×7
tor (G51, GH11 and GS52).
4. Remove the G-Board, GH-Board and GS-Board.
7.15. Remove the speaker L, R
1. Disconnect the connector (A12). (See section 7.4.)
2. Remove the screws (×4
speaker L, R.
7.16. Remove the S-Board
1. Remove the stand brackets. (See section 7.10.)
2. Remove the screws (×2
3. Disconnect the connector (S1).
4. Remove the screws (×2
the
G-Board,
) and remove the front shield
) and disconnect the connec-
each) and remove the
).
) and remove the S-Board.
GH-
7.17. Remove the K-Board
1. Remove the S-Board. (See section 7.16.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (×2
4. Disconnect the connectors (K1) and remove the K-Board.
7.18. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1
each).
2. Remove the cabinet assy and the plasma panel fastening
21
).