Remove The Sc-Board; Remove The Ss-Board; Remove The Stand Brackets - Panasonic TH-42PV8D Service Manual

7.9.

Remove the SC-Board

1. Remove the SU-Board and SD-Board. (See section 7.7.
and 7.8.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (×6 ) and remove the SC-Board.

7.10. Remove the SS-Board

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS23 and
SS34).
3. Disconnect the flexible cables (SS53A and SS56A).
4. Remove the molding prop (×1
5. Remove the screws (×5

7.11. Remove the stand brackets

1. Remove the plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws
(×4 each) and remove the stand brackets (left, right).
20
).
) and remove the SS-Board.