7.13. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 7.11.
and 7.12.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (×8
7.14. Remove the SS-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS24, SS33,
SS34 and SS35).
3. Disconnect the flexible cables (SS53, SS55 and SS56).
4. Remove the screws (×6
) and remove the SC-Board.
) and remove the SS-Board.
7.15. Remove the SS2-Board
1. Disconnect the connector (SS24) and disconnect the flex-
ible cable (SS58).
2. Remove the screws (×2
7.16. Remove the Stand brackets
1. Remove the Plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the Plasma panel surface facing downward.
2. Remove the Stand brackets (L, R) fastening screws
(×5
each) and remove the Stand brackets (L, R).
22
) and remove the SS2-Board.