Editing The Input Fx/Track Fx Settings - Boss RC-600 Owner's Manual

Editing the Input FX/Track FX Settings

For details on the parameters, refer to "Parameter Guide" (PDF).
1 .
Select the memory for which you want to edit the
input FX/track FX settings.
2 .
Press the [LOOP] button.
The LOOP screen appears.
3 .
Use the PAGE [J] button to switch the page, and then
press the [1] (INPUT FX) or [2] (TRACK FX) knob.
The INPUT FX screen/TRACK FX screen appears.
4 .
Select the bank of the effect you wish to edit.
Use the PAGE [J] button to switch the page, and then turn
1 .
the [1] (BANK) knob to select the bank.
2 . Press the PAGE [K] button to return to the previous page.
5 .
Press the [1]–[4] knobs to select the effect to edit.
6 .
Use the [K] [J] buttons to switch to the page
containing the parameter you want to edit.
* The available parameters depend on the type of effect you
select.
7 .
Turn the [1]–[4] knobs to edit the values.
8 .
Press the [EXIT] button a number of times to return to
the play screen.
9 .
If you want to save the edited settings, execute the
Write operation (p. 13).
Editing a Memory
17