Input/Output Settings (Input) - Boss RC-500 Parameter Manual

Settings for the Entire RC-500

Input/Output Settings (INPUT)

Parameter Value
PHANTOM
OFF, ON
Specifies the output destination of the audio that is input to the MIC IN jack.
OUT-A&B
MIC IN
OUT-A
OFF
Specifies the output destination of the instrumental sound that is input to the INST IN (A/MONO, B) jacks.
OUT-A&B
INST IN
OUT-A
OUT-B
OFF
Specifies the output destination of the rhythm sound.
OUT-A&B
OUT-A
RHYTHM
OUT-B
LOOP
OFF
MIC IN NS 0–50–100
INST IN NS
0–50–100
Specifies the input/output that is shown by the INPUT indicator.
ALL IN
PEAK SRC
MIC IN
INST IN
LOOP&RHYTHM
14
Explanation
(Bold: default)
Turns phantom power on/off.
Output from both OUTPUT A/MONO and B jacks.
Output from the OUTPUT A/MONO jack.
No output.
Output the INST IN A/MONO jack 0 OUTPUT A/MONO jack, and the INST IN B jack 0
OUTPUT B jack.
Mix the sound that is input to the INST IN (A/MONO, B) jacks, and output it from the
OUTPUT A/MONO jack.
Mix the sound that is input to the INST IN (A/MONO, B) jacks, and output it from the
OUTPUT B jack.
No output.
Output from both OUTPUT A/MONO and B jacks.
Output from the OUTPUT A/MONO jack.
Output from the OUTPUT B jack.
With the "LOOP" setting, RC-500 drum sounds played by note messages from an external
MIDI device can be output to a track and recorded.
No output.
Specifies the depth of the noise suppressor that is applied to the audio input from the MIC
IN jack during loop recording.
* The noise suppressor is not applied to the bypass sound.
Specifies the depth of the noise suppressor that is applied to the audio input from the INST
IN (A/MONO, B) jacks during loop recording.
* The noise suppressor is not applied to the bypass sound.
All audio input
Audio input from the MIC IN jack
Audio input from the INST IN (A/MONO, B) jacks
Peak level of the playback sound