Excell Dingo EX2002 User Manual page 45

EXCELL PRECISION CO., LTD
Command mode
1. Command Format A
Host Command
Slave
MZ Zero
MT Tare
MG Gross Weight
AT Accu. Current net weight and times plus 1
ST Deduct times of last accu. Value minus 1
DT Clear accu. Value and times
BB
Start batching (one time)
BC Start batching (continuous)
BD Start unload
SC Transmit continuous
SM Manual transmit
% Stop continuous transmission and enter the command mode
Note ： Since BC continuous weighing is completed, it must zero re-set the
continuous weighing frequency by BB command.
2. Command Format B
Host Command
Slave
RW Read current weight
RG Read Gross Weight
RB Read current display of wt (simple)
RI Read Net (simple)
RJ Read comparison situation + current display of weight (simple)
RK Read comparison situation + Gross (simple)
RL Read comparison situation + Net (simple)
RO Read comparison situation (2)
RF Read prior completed weight
Note ： Prior command plus %
Read Weight Compared value: RS□□
FW
Read target item of unload value
S2 Read SP2
UD Read Under
ZB Read Zero Band
PR Reading Peak value
Ex:
Command : RSFW＜CR＞＜LF＞
04011010
<CR>< LF>
Command
CZ Zero compensation On/OFF
CT Clear TARE value
MN Net weight
HB Load stop
SA Auto transmit
SO Command mode
<CR>< LF>
Data
S1 Read SP1
S3 Read SP3
LO Read LO
HI Read HI
OV Read Over
43
<CR>< LF>
<CR>< LF>
RT Read TARE
RN Read Net weight
RH Read Gross (simple)
RA Read accu. Value (incl. times)
Indicator reply : RSFW□□□□□□
Finish 6 bytes
ZSME400000002