Loading The 650-Sheet Duo Drawer; Loading The Multipurpose Feeder - Lexmark X548 Quick Reference

4
Flex the sheets back and forth to loosen them. Do not fold or crease
the paper. Straighten the edges on a level surface.
5
Load the paper stack with the recommended print side faceup.
6
Make sure the paper guides are secure against the edges of the
paper.
Note: Make sure the side guides are placed tightly against the
edges of the paper so that the image is registered properly on
the page.
7
Insert the tray.
8 If a different type or size of paper was loaded than the type or size
previously loaded in the tray, then change the Paper Type or Paper
Size setting for the tray from the printer control panel.
Note: Mixing paper sizes or types in a paper tray may cause
jams.
Loading the 650‑sheet duo drawer
The 650‑sheet duo drawer (Tray 2) consists of a 550‑sheet tray and an
integrated 100‑sheet multipurpose feeder. The drawer is loaded in the
same way as the 250‑sheet tray and the optional 550‑sheet tray, and
supports the same paper types and sizes. The only differences are the
look of the guide tabs and the location of the paper size indicators.
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each paper drawer or tray
separately. Keep all other drawers or trays closed until
needed.
6
1 Length guide tabs
2 Size indicators
3 Width guide tabs

Loading the multipurpose feeder

1 Push the multipurpose feeder latch to the left.
1
2
3