Before Using The Product; About The Adapter; Features; Expansion Chassis (Option) - Contec EAD(LPCI)SF User Manual

Pci bus expansion adapter for low profile pci pc-slot
Table of Contents

Advertisement

1. Before Using the Product

This chapter provides information you should know before using the product.

About the Adapter

The EAD(LPCI)SF is an expansion adapter that connects the optional expansion chassis [ECH(PCI)SF]
to a PC to extend a PCI bus expansion slot in the PC, thereby providing additional PCI bus expansion
slots. The expansion adapter can connect the expansion chassis to the PC over a distance of up to 12m.

Features

-
Using high-speed serial transfer (2.5 Gbps), capable of extending the PCI bus to up to 12m.
-
PCI-bus compatible, eliminating the need for changing PCI bus board software.
-
Using a, noise-immune, STP-category, 5e cable easy to wire and install.
-
Capable of expand the PCI bus (5V/32-bit, 33 MHz) from a single PCI bus slot in the PC.
-
Expansion chassis free of choice according to the number of PCI bus slots and the board size required.
-
Power supply controllable in response to the turning on/off of the PC's power supply.
-
Supporting both of Low Profile and standard PCI slots (exchangeable with the bundled bracket).

Expansion chassis (Option)

PCI Bus Expansion Chassis
PCI Bus Expansion Chassis (Short x 2Slots)
PCI Bus Expansion Chassis (Long x 2Slots)
PCI Bus Expansion Chassis (Short x 4Slots)
PCI Bus Expansion Chassis (Long x 4Slots)
PCI Bus Expansion Chassis (Short x 4Slots)
PCI Bus Expansion Chassis (Short x 7Slots)
PCI Bus Expansion Chassis (Long x 7Slots)
PCI Bus Expansion Chassis (Short x 13Slots)
PCI Bus Expansion Chassis (Long x 13Slots)
Check the CONTEC's Web site for more information on these expansion chassis.

Connection cable (Option)

Connection cables (12-meter, STP-category, 5e straight cables) are bundled with this product. The
following options can also be available:
UTP-category, 5e straight cables (3m):
UTP-category, 5e straight cables (5m):
UTP-category, 5e straight cables (10m): TP-10 *1*2
*1: A pair of cables are required for connection.
*2: When used in an environment susceptible to extraneous noise, UTP cables may cause link
connection. It is advisable to use STP cables available on the market.
EAD(LPCI)SF
:
ECH(PCI)SF-H2B
:
ECH(PCI)SF-F2B
:
ECH(PCI)SF-H4B
:
ECH(PCI)SF-F4B
:
ECH(PCI)SF-H4A
:
ECH(PCI)SF-H7A
:
ECH(PCI)SF-F7A
:
ECH(PCI)SF-H13A
:
ECH(PCI)SF-F13A
TP-03 *1*2
TP-05 *1*2
1. Before Using the Product
1

Advertisement

Table of Contents
loading

Table of Contents