Natural/White Key; Natural/White Keys - Kurzweil PC2 Series Service Manual

PC2/PC2X Disassembly/Assembly
PC2X Keyboard Assembly

Natural/White Key

Pivot
location
Key spring
location
Figure 4-17
Pivot
location
Key spring
location
Figure 4-18

Natural/White Keys

1. Remove the silver key spring located at the rear of the key. You will notice that the bottom
4-28
Strikes the front and rear key
contact on key depression
Natural/white key, 88-note keyboard
Strikes the front and rear key
contact on key depression
Sharp/black key, 88-note keyboard
of the spring is secured to the keyboard chassis by a hook.
You can remove the spring by inserting a dowel (3mm diameter) into the spring, and
pushing down on it slightly. Then pull the top of the dowel toward the front of the
keyboard. This will unhook the spring from the keyboard chassis.
Hooks under the front
of the keyboard chassis
Mounts through the
keyboard chassis
Hooks under the front
of the keyboard chassis
Mounts through the
keyboard chassis