MSI MS-6301 Manual page 11

2.1-6 Fan Power Connector: CPUFAN/PSFAN/SYSFAN
These connectors support system cooling fan with + 12V. It supports three
pin head connector. When connecting the wire to the connector, always
take note that the red wire is the positive and should be connected to the
+12V, the black wire is Ground and should be connected to GND. If your
mainboard has System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of this function.
SENSOR
+12V
GND
CPUFAN
For fans with fan speed sensor, every rotation of the fan will send out 2
pulses. System Hardware Monitor will count and report the fan rotation
speed.
Note: 1. Always consult vendor for proper CPU cooling fan.
2. CPU FAN supports the FAN control. You can install PC Alert
utility. This will automatically control the CPU FAN Speed according
to the actual CPU temperature.
3. During Suspend mode, FAN status can be set through BIOS.
PSFAN: Power Supply Fan
CPUFAN: Processor Fan
SYSFAN: System(Chassis) Fan
2-6
SENSOR
+12V
GND
PSFAN
SENSOR
+12V
GND
SYSFAN