Table of Contents
Advertisement
The function comes into operation:
•
5 minutes after the completion of the programme.
•
After 5 minutes if the programme has not started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme
selection mode.
3. Press the button related to the programme you want to start. The related programme indicator comes
on.
4. Close the appliance door to start the programme.
Option delay
1. Set the programme.
2. Press the Delay button to delay the start of the programme. The delay indicator comes on.
3. Close the appliance door to start the countdown.
When the countdown is completed, the programme starts.
Option Multitab
1. Set the programme.
2. Press and hold simultaneously
Activate this option when you use multi-tablets that integrate the salt, rinse aid and detergent functions.
They can also contain other cleaning or rinsing agents.
This option deactivates the release of salt. The salt indicator does not come on.
and
until the indicator
comes on.
11
Advertisement
Table of Contents
