Table of Contents
Advertisement
Managing hot spares
You may configure one disk as a global hot spare to protect critical data on the RAID 1/1E/10
volume(s). You can create the hot spare disk at the same time you create the RAID 1/1E/10
volume. Refer to this section when adding a hot spare disk on an existing volume.
If a disk on an RAID 1/1E/10 volume fails, the utility automatically rebuilds the
failed disk data on the hot spare. When the failed disk is replaced, the utility
assigns the replacement as the new hot spare.
To create a hot spare:
1.
From the Adapter Properties screen, use the arrow keys to select RAID Properties,
then press <Enter>.
2.
From the Select New Volume Type screen, click View Existing Volume.
ASUS Z10PC-D8 Series
5-59
Advertisement
Table of Contents
