Table of Contents
Advertisement
5.5.1
RAID 1 volume
The RAID 1 feature supports simultaneous mirrored volumes with two disks.
The RAID 1 feature supports hot swap capability, so when a disk in an RAID 1 volume fails,
you can easily restore the volume, and the swapped disk is automatically re-mirrored.
To create a RAID 1 volume:
1.
Turn on the system after installing all SAS hard disk drives.
2.
During POST, press <Ctrl>+<C> to enter the SAS configuration utility.
To avoid data loss, do not turn off the system when rebuilding.
3.
From the Adapter List screen, select the controller and press <Enter>.
The number of items displayed depends on the controller.
ASUS Z10PC-D8 Series
5-39
Advertisement
Table of Contents
