Program Auto - Sony a7s II How To Use Manual

Hint
In [Program Auto] mode, you can change the combination of shutter speed and aperture
value while maintaining the correct exposure by turning the control wheel. This function is
called "Program Shift" (P*).
Note
In [Superior Auto] mode, the recording process takes longer, since the product creates a
composite image. In this case, the shutter sound is heard multiple times, but only one
image is recorded.
For [Intelligent Auto] and [Superior Auto] mode, most of the functions are set
automatically, and you cannot adjust the settings on your own.
[38] How to Use

Program Auto

Allows you to shoot with the exposure adjusted automatically (both the shutter speed and
the aperture value).
You can set shooting functions such as [ISO].
1. Set the mode dial to P (Program Auto).
2. Set the shooting functions to your desired settings.
3. Adjust the focus and shoot the subject.
Program Shift
You can change the shutter speed and aperture (F-value) combination by rotating the
front/rear dial, without changing the appropriate exposure that is set by this product. This
function is available when you do not use the flash.
"P" on the screen changes to "P*" when you turn the front/rear dial.
To cancel program shift, set the shooting mode to other than [Program Auto], or turn off
the camera.
Note
According to the brightness of the environment, the program shift may not be used.
Set the shooting mode to another one than "P" or turn off the power to cancel the setting
you made.
When the brightness changes, the aperture (F-value) and shutter speed also change
while maintaining the shift amount.
Shooting Selecting a shooting mode