Sony a7s II How To Use Manual page 54

1. MENU→
[Enter].
2. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen
is set to [For viewfinder].
3. Press Fn (Function) button to switch the screen to Quick Navi screen.
In Auto Mode or Scene Selection mode
In P/A/S/M/Sweep Panorama mode
4. Select the desired function by pressing the up/down/left/right side of the control wheel.
5. Turn the front dial to select the desired setting.
Some setting values can be finely adjusted by turning the rear dial.
Performing settings on the dedicated screen
Select the desired function in step 4, then press
dedicated setting screen for the function appears. Follow the operating guide (A) to perform
the settings.
(Custom Settings) → [DISP Button] → [Monitor] → [For viewfinder] →
on the center of the control wheel. The