Table of Contents
Advertisement
Settings].
[FINDER/MONITOR] is currently set to [Auto]. Set [FINDER/MONITOR] to
[Viewfinder(Manual)] or [Monitor(Manual)].
[335] Troubleshooting
The image is whitish (Flare)./Blurring of light appears on
the image (Ghosting).
When pointing the lens toward the strong light source, excessive light enters the lens and
the image may come out white (flare) or extraneous light (ghost images) may appear on
the image, but this is not a malfunction.
When using the zoom lens, attach the lens hood. Set up the composition so that you
shoot images while avoiding backlit condition.
[336] Troubleshooting
The corners of the picture are too dark.
If any filter or hood is used, take it off and try shooting again. Depending on the thickness
of the filter and improper attachment of the hood, the filter or the hood may partially
appear in the image. The optical properties of some lenses may cause the periphery of
the image to appear too dark (insufficient light). You may compensate for this
phenomenon with [Shading Comp.].
When using an E-mount lens for APS-C size shooting, set [APS-C/Super 35mm] to [Auto]
or [On], then shoot the images.
When you switch to movie mode or start recording a movie with [
[XAVC S 4K], [APS-C/Super 35mm] is locked to [Off].
If an APS-C size dedicated lens is attached, the edges of the screen may appear dark.
When shooting 4K movies with this camera, we recommend using a lens compatible with
the 35 mm full-frame format.
[337] Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies
File Format] set to
- Quick Links:
- Preparing the Camera
Hide quick links:
Advertisement
Table of Contents
