Operation Mode Selection; Cooling Operation - LG LS-J0962HL Owner's Manual

How to use the Operation Mode Selection button

Cooling Operation

Natural wind by the CHAOS logic
For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to
CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan
speed according to the CHAOS logic.
Press the Start/Stop button.
1
The unit will respond with
a beep.
Open the door on the remote control. To select Cooling
2
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
Close the door on the remote control. Set the temperature
3
lower than the room temperature. The temperature can be
set within a range of 18°C~30°C in 1°C increments.
Set the fan speed again with the door
4
of the remote control still closed. You
can select the fan speed in four steps-
low, medium, high, or CHAOS. Each
time the button is pressed, the fan
speed mode is shifted.
7
Auto Healthy
Dehumidification (Heat pump model only)
To raise the temperature
To lower the temperature
Heating