LG LS-J0962HL Owner's Manual page 12

PLASMA Purification Operation(Option)
PLASMA Air Purifying Operateion only
PLASMA
Press the Start/Stop button.
1
The unit will respond with a
beep.
Open the door on the remote control.
2
Press the PLASMA air purifying
operation ON/OFF button.
Operation will start when the button is
pressed and stop when the button is
pressed again.
Set the fan speed again with door of the remote control
3
closed. You can select the fan speed in four steps-low,
medium, high or CHAOS. Each time the
button is pressed, the fan speed mode
is shifted.
Air purifying operation (PLASMA) with cooling,
Heating or any other operations.
If you press the only PLASMA button, PLASMA
air purifying operates only.
Then, fan speed is low. You can select the fan
speed in four steps-low, medium, high or
CHAOS.
Each time the button (
speed mode is shifed.
12
PLASMA
) is pressed, the fan