Settings; Languages; Time/Date; Alarm - SENDO S600 Manual

Table of Contents

Advertisement

14

Settings

Select
Settings
from the main menu. This
menu allows you to define the settings for
your phone.
>
Note:
The contents of the
may vary by network service provider.
Please review your phone's menu to
determine the menu items and features
available on your phone.

Languages

φ
g Menu Settings
Find it:
Languages
This menu allows you to change the
language on the phone.
?
Tip:
If the phone language is changed by
mistake, press and hold * in the main
screen to display the language list. Scroll
to the language you want (using : and
;) and press g.

Time/Date

φ
g Menu Settings
Find it:
Time/Date
Select this menu to set the time and date on
your phone. The options are:
Set time
Enter the time and press g, OK. The time
will be stored.
Set date
Enter the date and press g, OK. The date
will be stored.
Time format
Use this to choose whether to display the
time in AM/PM or 24hr format.
Auto update
You can update the time and date
automatically from the network. Select
to use the time and date from the network,
select
Off
to never use the time and date
from the network, or select
check the time and date from the network
before any update.
>
Settings
menu
Display clock

Alarm

φ
You can use your phone as an alarm clock.
Set the alarm to
you require the phone to ring (in 24 hour
format). When it rings press:
d,
g,
The alarm will then sound again.
Please observe the following notes:
Note
When activated, the alarm will sound for
approximately 45 seconds before switching off (if you
do not press d,
If the alarm activates during a call, the phone will
beep and the display will flash to indicate that the
alarm is active. As described above, press d,
switch it off, or g,
minutes.
If the volume is set to silent mode, the alarm will
activate but there will be no sound. The phone will still
vibrate if the vibrate feature is on.
The alarm will sound even if the phone is switched off.
The phone will power on (if battery power is
available) but you will not be able to receive or make
calls. If the volume was set to silent mode before the
phone was switched off, the alarm will still sound as
silent mode is cancelled when the phone is switched
off. Once the alarm finishes, the phone will switch off
On
automatically.
Confirm
to
[[[
]]]
53
Note:
This option is only available if
supported by your network service
provider. Check with your service
provider for details.
Turn the time display
g Menu Settings
Find it:
On
and enter the time when
Off
to switch it off, or
Snooze
to stop the alarm for ten minutes.
or g, Snooze).
Off
Snooze
to stop the alarm for ten
On
or Off.
Alarm
Off
to
14

Advertisement

Table of Contents
loading

Table of Contents