Settings - SENDO J530 User Manual

12

Settings

Languages
This menu allows you to change the
language of the phone.
Alarm clock
You can use your phone as an alarm clock.
Enter the Settings menu and press
Alarm. Set the alarm to
time (in 24hr format) when you require the
phone to ring. When it rings press
d
, Off to switch it off, or
g
, Snooze to stop the alarm for ten
minutes. The alarm will then sound again.
☛
Note: The alarm will sound even if the
phone is switched off. The phone will
power on but you will not be able to
receive or make calls. Once the alarm
finishes the phone will switch off.
Setting time and date
Go to Set date and press
the date and press
g
Press , Select. Enter the time in 24 hour
g
format, Press , OK.
The date and time will be stored.
ScreenSaver
A screensaver is a picture that is displayed
when the phone has been idle for a certain
amount of time.
g
,
On and enter the
g
, Select. Enter
g
, OK.
It is possible to turn this on or off, select the
delay before it becomes active and change
the picture.
When the screensaver is active press c to
use the phone
Auto redial
When this function is activated, the phone
will automatically redial a number when the
call attempt fails. If the other user's phone is
busy, the phone will wait a few seconds
before each attempt, and then beep when it
succeeds.
Auto answer
This function is only applicable when certain
handsfree accessories (e.g., a personal
hands-free headset) are connected to the
phone. When you receive an incoming call
with this feature activated, the phone rings
three times before automatically accepting
the call.
Any key answer
When this function is activated, you can
answer an incoming call by pressing any
d
key, except
33
, Reject.
12