Sms And Mms Settings - SENDO P600 Manual

When you have a new message in your
voice mailbox, your phone displays either
the voice mail icon
or a text message sent from the network.
This depends on your network service
provider. From the main screen press g,
Call (if available) to call your voice
mailbox or c to cancel the message.
From the main screen press and hold 1.
Select the Voice mail
Messages menu.
If the phone asks for the voice mailbox
number, enter it and press g, Call. The
number can be obtained from your network
service provider.
To enter/change a voice mailbox number,
see the Advanced settings section on
Page 55.

SMS and MMS settings

SMS settings
φ
g Menu Messages
Find it:
Settings SMS settings
Select this To
Status report Set whether or not you want to be
informed when your correspondent
has received your text message.
Save sent Save all sent text messages to the
Sent folder (On).
Centre Enter or change the service centre
number number for text messaging.
Characters Choose whether you want to enter
text in GSM
Unicode
mode. Unicode characters take up
more room on your phone so the
length of a standard text message
is restricted to half the usual
number of characters.
in the main screen
option from the
(Latin characters) or
(Non Latin characters)
[[[
MMS settings
φ
g Menu Messages
Find it:
Settings MMS settings
This menu provides settings for MMS
messaging. These settings may have already
been configured on your phone by your
network service provider. If your phone is not
configured already, the fastest and easiest
way to do this is to visit:
http://www.sendo.com/config
to automatically configure your settings. The
Sendo Easy Configurator sends an SMS
message to your phone containing the
settings you require. Alternatively, you can
ask your network service provider to send you
this information (if available).
MMS settings are grouped into profiles. A
profile is a collection of settings for MMS
messaging. You can create up to 5 MMS
profiles on your phone.
This menu provides the following settings:
>
Note: Some of these settings may not be
required for your network. Contact your
network service provider for details.
Select profile
Select the current profile.
Rename profile
Rename the current profile.
Sending
Allows you to set the MMS sending options:
Select this To
Validity Set a maximum amount of time
period allowed for a message to reach a
recipient. If the recipient cannot be
reached within the time, the
message is removed from the
message service centre.
Read report Select whether or not you want to
be notified when your messages
have been read.
]]]
23
5