To Use The Machine As A Network Printer (Network Connection); Specifying Network Settings - Canon ImageCLASS MF5770 User Manual

To Use the Machine as a Network Printer (Network Connection)

IMPORTANT
• The machine needs to be restarted for the specified settings to become effective. To restart the machine,
disconnect the power cord, wait for at least 10 seconds, and connect the power cord again.
NOTE
• For details on specifying network settings, see Chapter 2,"Specifying the Network Settings," in the Network Guide.
• For additional network protocol settings, see the Network Guide.
• For the values of the network settings, consult your network administrator or internet service provider (ISP).

Specifying Network Settings

1 Press [Menu] ➝
or
to select <1.LAN SETTINGS> ➝ press [Set].
2 Press or
to select <1.IP ADDRESS AUTO.> ➝ press [Set].
3 Press or
G To obtain an IP address automatically (dynamic allocation):
to select <ON> ➝ press [Set].
4 Press or
to select <1.DHCP>, <2.BOOTP>, or <3.RARP> ➝ press [Set].
5 Press or
to select <ON> ➝ press [Set].
6 Press or
7 Press [Stop/Reset] to return to the standby display.
8 Restart the machine by disconnecting the power cord, and then reconnecting it.
G To specify an IP address manually (static allocation):
to select <OFF> ➝ press [Set].
4 Press or
to select <2.IP ADDRESS> ➝ press [Set].
5 Press or
6 Enter an IP address of the machine using the numeric keys ➝ press [Set].
Write down the IP address you entered: _______ . _______ . _______ . _______
to select <3.SUBNET MASK> ➝ press [Set].
7 Press or
8 Enter the subnet mask using the numeric keys ➝ press [Set].
Write down the subnet mask you entered: _______ . _______ . _______ . _______
to select <4.DEFAULT GATEWAY> ➝ press [Set].
9 Press or
10 Enter the default gateway address using the numeric keys ➝ press [Set].
Write down the gateway address you entered: _______ . _______ . _______ . _______
11 Press [Stop/Reset] to return to the standby display.
12 Restart the machine by disconnecting the power cord, and then reconnecting it.
to select <6.NETWORK SETTINGS> on the LCD ➝ press [Set].