KDF 007-Plus Instruction Manual page 5

Burn out furnace
Table of Contents

Advertisement

Do not let the unit door stay opened. This may cause fire or injury.
Prohibited
Before using the unit, make sure that the temperature inside muffle is below 40℃ and
clean the dusts inside the unit. The dusts inside the unit may cause the heater damage
and electric shock.
Cleaning
inside muffle
Before using the unit, install exhaust sleeve and ceramic tray. If they are damaged, replace
them immediately. The damaged accessories may cause damage of muffle and heater.
Accessory
Installation
Do not touch the highly heated area of the unit in use or soon after use.
Especially, the top surface is highly heated.
Contact
Prohibited
Do not use or place anything flammable near the unit. This may cause fire or burn.
Prohibited
Check the unit for signs of parts damage prior to use and make sure the unit is in normal
state. Contact the dealer for advice when you find anything abnormal.
Check Before
Use
Plug the main power cord into power outlet completely. The plug may heat up and cause
fire or burns if not completely plugged in. In addition, if the metal part of plug is touched
while the plug is not fully plugged in, electric shock may result.
Required
Do not place the unit on an unstable base to prevent the unit from falling and damaging.
This may cause injury.
Prohibited
Unplug the main power cord from the power outlet when the unit is not in use for a long
period of time.
Unplug
When you unplug the power cord from the power outlet, do not pull the cord. If the cord is
damaged, fire or shock may result. Always remove by handling the plug.
Prohibited
-3-

Advertisement

Table of Contents
loading

Table of Contents