Table of Contents
Advertisement
Power Requirement
・We recommend you to use the proper power voltage described in the main specifications of the unit.
Location & Environment
・Set up the unit on a flat stable table.
・Keep the unit away from walls and other equipment.
Note) Leave a minimum of 20cm of space around the unit as well as 1.5m of space above the unit. If not, conduct
fire prevention. Do not place anything flammable near the unit.
・Do not place anything on the top of the unit other than exclusive catalyst cleaner or exhaust fume ventilator.
Accessory
・Put the provided ceramic gas outlet into gas vent on the top of the unit.
・Place the provided ceramic tray in furnace.
Note) Be sure to use the accessories. If damaged, replace a new one.
Optional Item Installation
・Place optional catalyst cleaner or exhaust fume ventilator on the top of the unit and connect the power cord
to outlet for cleaner in accordance with the instruction manual.
Air Pump Connection
・In order to fire casting ring quickly, it is available for airflow. In case of using airflow, provide an air pump for
aquarium (1~2L/min.) and set up the tube as per the fig in below. Do not connect a power plug of the pump to
power outlet on the back of the unit. Connect the power plug to other power outlet.
AIR INLET
Power On
・Turn the switch on the front right side of the unit upward to power on. After is displayed, an existing
muffle temperature is displayed.
Tube for air pump
The installation is finished.
THIS IS CALLED STANDBY MODE.
-8-
Turn the knob of AIR INLET to counter-clockwise
and insert the tube and turn the knob clock-wise.
Advertisement
Table of Contents
