Basics; Component Names And Functions - JVC KW-V130BT Instruction Manual

INITIAL SETTINGS INITIAL SETTINGS
3
Set the clock time.
<Radio Data Synchronizes the clock time with
System> FM RBDS.
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
4
Finish the procedure.

BASICS

BASICS

Component names and functions

V Caution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
1 Reset button
Resets the unit. (Page 3)
2 Loading slot
3 M (Eject) button
• Ejects the disc. (Press) (Page 9)
• Forcibly ejects the disc. (Hold) (Page 9)
4 Volume +/– button
Adjusts the audio volume. (Page 6)
5 USB input terminal (Page 63)
6 Monitor panel
7 Screen (touch panel)
8
button
• Switches the screen. (Press)
– The screen switched to depends on the
<Navigation> setting (Page 56).
• Turns off the screen. (Hold) (Page 6)
• Turns on the screen. (Hold) (Page 6)
9 HOME/
button
• Displays the Home screen. (Press) (Page 7)
• Turns on the power. (Press) (Page 6)
• Turns off the power. (Hold) (Page 6)
p FNC/ button
• Pops up the short-cut menu. (Press)
(Page 8)
• Activates the voice dialing. (Hold) (Page 43)
q EQ button
Displays the <Equalizer> screen. (Page 47)
ENGLISH 5