Binatone IHOME PHONE Quick Start Manual

Hide thumbs Also See for IHOME PHONE:

Download this manual See also: User Manual, Manual

iHome Phone – Quick Start Guide

For a full explanation of all features and instructions, please refer to the User's Guide.

Setting up your iHome Phone

A. Attach the stand to DECT base station

1. Insert the stand into the locking grooves at bottom of the DECT

base station.

2. Twist the stand slightly until the stand is firmly secured to the

DECT base station.

Connect the power cable and telephone line cord

1. Plug the power cable and telephone line cord to the power jack

and phone jack at the bottom of the DECT base station.

2. Plug the other end into a power and telephone wall socket.

Page 1 iHome Phone – Quick Start Guide For a full explanation of all features and instructions, please refer to the User's Guide. Setting up your iHome Phone Connect the power cable and telephone line cord A. Attach the stand to DECT base station 1.
Page 2 C. Removing back cover D. Installing the battery 1. Use the Stylus pen to gently press the keyhole to release the 1. Place the supplied rechargeable battery into the battery spring lock. compartment of the handset. 2. The back cover will disengage from the handset. 2.
Page 3 F. Remove memory card Place the handset on the DECT base station to charge for at least 6 hours. If the Red Charging LED did not light up, you need to re-align the iHome Phone to get a good charging contact with the DECT base station.
Page 4: General Information
If you need help..If is a secured network, you will be prompted to enter the wireless The Binatone Help Line is available from 9.00am ~ 5.00 pm, password. Mondays to Fridays, please call: 5.

Ihomephone 2