Scanner Self-Test - Canon FS 3.6 User Manual

Scanner Self-Test

The scanner can perform a self-test to confirm the correct operation of its
mechanisms, circuits and lamp. Initiate the self-test after the scanner has been
completely set up using the following procedures. The self-test can also be used to
check a suspected malfunction during use.
• Ensure that you eject any film from the scanner before you initiate the self-
test.
• If a message displays during the procedure, follow the instructions in the
message.
Click the [Device] menu and click [Diagnos-
tics...].
Self-Test Dialog
Eject the film from the scanner and click the [Test] button.
Ends the self-test and closes the dialog.
Ejects the film.
Other Functions
Self-Test Dialog
A message will display in the dialog if a
problem is detected.
Initiates the self-test.
82