Problems Starting Software Programs - Canon FS 3.6 User Manual

Scanner not detected message displays
Cause 1:
Solution:
Cause 2:
Solution:
Cause 3:
Solution:

Problems Starting Software Programs

Specified device not found message displays
Cause 1:
Solution:
Cause 2:
Solution:
Cause 3:
Solution:
Problem with SCSI adapter or its software message displays
Cause:
Solution:
Scanner power is off
Close Windows. Turn on the scanner power first, then restart
Windows and run auto configuration.
Scanner power was off when Windows was started.
Close Windows. Turn on the scanner power first, then restart
Windows and run auto configuration.
Scanner is incorrectly attached
Turn off the computer and reattach the scanner properly.
Turn on the scanner power first, then restart Windows and
run auto configuration.
(Getting Started Guide)
Scanner power is off
Close Windows. Turn on the scanner power first, then restart
Windows and run auto configuration.
Scanner power was off when Windows was started.
Close Windows. Turn on the scanner power first, then restart
Windows and run auto configuration.
Scanner is incorrectly attached
Turn off the computer and reattach the scanner properly.
Turn on the scanner power first, then restart Windows and
run auto configuration.
(Getting Started Guide)
Scanner power is off
Turn on the scanner. (Getting Started Guide)
(p. 120)
(p. 120)
Appendices
113